Odoo lot and serial number tracking covers two distinct tools, and picking the wrong one for a product creates either unnecessary scanning at every receipt or gaps in your records. The settings look similar and the setup overlaps, so the distinction is easy to miss until a recall or warranty claim lands on your desk.
This post is for owners and operations managers at small businesses with physical stock: distributors, light manufacturers, supplement sellers, and any shop that needs to trace where product came from and where it went. It covers what each tracking type does, which products actually need it, and the exact steps to configure it in Odoo.
What Lot Tracking and Serial Tracking Actually Do
A lot number is a single identifier assigned to multiple units received and stored together in one pack. A serial number, by contrast, is a unique identifier assigned to one individual unit. Think of a lot as a batch label and a serial number as a product fingerprint.
When you receive 500 bottles of hand sanitizer under one purchase order, assigning a single lot number takes seconds and ties all 500 units to that receipt. If a supplier issues a recall, you can pull every lot number from that vendor and know exactly which locations hold affected stock. With serial tracking, you would scan 500 individual numbers, one per bottle.
Both types give you a traceability trail, but the granularity differs. Lot tracking gives you batch-level history: where the group came from, where it moved, and when it shipped. Serial tracking gives you individual unit history from receipt through delivery and into after-sales records. That extra detail has real value for some products and a real cost for others.
When Serial Numbers Are Worth the Extra Work
Serial numbers make sense when you need to answer: where is unit X right now, and what has happened to it? Odoo's own documentation cites smartphones, laptops, fridges, and electronic devices as the kinds of items suited for serial number tracking. These are products that may need after-sales service tied to the specific unit.
For a small business, the practical test is simple: does this product carry a warranty tied to the specific unit, or could a customer call back with a problem you need to trace to one item? If yes, serial tracking pays for itself in time saved during a service call or warranty dispute. If the item is a commodity sold in bulk, serial tracking adds data entry overhead on every receipt, every move, and every shipment, with no real decision value gained.
A common mistake is enabling serial tracking on every product at initial setup because it feels thorough. Reserve it for high-value items, warranty-registered goods, and anything subject to individual unit repair or inspection. For everything else, lot tracking or no tracking is the right call.
When Lots Are the Right Choice
Lot tracking fits products where the question is "which batch is this from?" rather than "which exact unit is this?" It is built for items received in large quantities where batch-level quality control or fault identification matters, and it handles that job with far less scanning overhead than serial tracking.
Food, supplements, chemicals, and pharmaceuticals are the clearest cases. If a supplier reports a contaminated production run, you need three answers quickly: which lots you received, which are still on hand, and which already shipped. Lot tracking answers all three in minutes.
Expiry dates are another driver. According to Odoo's documentation, only products tracked using lots and serial numbers can be assigned expiration information. Once lot tracking is on and dates are assigned, you can enable Odoo's FEFO (First Expired, First Out) removal strategy. FEFO automatically picks stock with the earliest expiration date first, which is an operational control, not just a report.
Setting Up Odoo Lot and Serial Number Tracking
Tracking is not a global on/off switch. You enable the feature once in settings and then configure each product individually. Follow this order to avoid the most common setup errors:
- Go to Inventory → Configuration → Settings → Traceability and enable Lots & Serial Numbers. Save.
- The Expiration Dates option only appears after Lots & Serial Numbers is enabled. If you need expiry fields, turn on Expiration Dates on that same settings page and save again.
- Open a product record and go to its Inventory tab. Set the Tracking field to By Lots for batch-tracked items or By Unique Serial Number for individual unit tracking.
- Tracking type is set per product, so you can mix lot and serial tracking freely across your catalog. Repeat the product-level step for each item that needs tracking.
- If using expiry tracking, set default expiration lead times on the product form so Odoo pre-fills dates at receipt.
- For FEFO, open your warehouse settings and choose First Expired First Out as the removal strategy. This requires tracking enabled and expiration dates on each lot; without dates, the strategy cannot sort by expiration.
Do not look for a tracking setting at the warehouse or category level. The Tracking field on each product's Inventory tab is the only place it lives, and it must be set per product.
Receiving, Moving, and Shipping Traceable Stock
Once tracking is active on a product, Odoo requires a lot or serial number at every stock movement. At receipt, open the incoming shipment and use the detail icon on each line to enter or scan the numbers before validating. Skipping this step will either block validation or leave lot fields blank, and you lose traceability from the start.
Internal transfers work the same way. If you move tracked inventory from one location to another, Odoo prompts for the lot or serial number. This is the step small operations miss most often because internal moves feel routine. A product transferred without a lot assignment effectively disappears from your traceability history.
At shipping, the picking operation shows which lot numbers are being fulfilled. If FEFO is active, Odoo selects lots by expiration date automatically. Review the full movement history for any lot or serial number at Inventory → Products → Lots/Serial Numbers, where every receipt, move, and shipment for that batch is recorded. For businesses that also track physical assets across multiple locations, IoT and asset tracking can complement your Odoo inventory setup.
Common Mistakes That Undercut Traceability
The most expensive mistake is forgetting to assign lot numbers at receipt. Everything downstream, from internal moves to outbound shipments, inherits that gap. Train receiving staff to treat lot assignment as part of the validation step, not an optional field to fill in later.
A second mistake is using the term "batch number" in your internal procedures while Odoo uses "Lot number" everywhere in the UI. When staff search for records or troubleshoot discrepancies, mismatched labels slow them down. Align your SOPs with Odoo's exact terminology from day one.
Third, some businesses enable the FEFO removal strategy but never assign expiration dates to incoming lots. Odoo's FEFO documentation confirms that the strategy requires lot or serial number tracking to be enabled, and without expiration dates on each lot, there is nothing to sort by. The strategy will not function as intended.
If you are setting up Odoo ERP for the first time, run a traceability test before go-live. Receive one item under a lot number, move it internally, then ship it, and confirm the full trail appears in the Lots/Serial Numbers dashboard. Our ERP data migration testing checklist covers the validation steps that catch these gaps before live stock comes in. If you want hands-on help with the full configuration, Odoo implementation and support from JDL can get your tracking setup right the first time.
Deciding which products need tracking and how to configure it correctly takes less time than fixing a traceability gap after a recall or warranty dispute. If you want to work through your product catalog with someone who has done this setup, book a free 30-minute call with Joshua at Junious Digital Labs.




